1982 650 Front brake master cylinder

For discussion for any of the above bikes.
Ikirkham
Posts: 6
Joined: Sat Apr 06, 2019 6:16 am

1982 650 Front brake master cylinder

Post by Ikirkham » Mon Apr 08, 2019 12:50 pm

Hi Everyone , new to the forum ........

trying to locate a front brake master cylinder as mine has completely seized ......does the 550 brake master cylinder fit the 650? ....seems to look the same?
or what other alternatives are there if I can't locate the real thing?

Thanks !,
Ian

User avatar
fossie
Club Member
Posts: 4869
Joined: Sat Oct 23, 2010 9:16 pm
Has thanked: 139 times
Been thanked: 685 times

Re: 1982 650 Front brake master cylinder

Post by fossie » Mon Apr 08, 2019 7:21 pm

Does it really need to be the exact type as in plastic all round etc, as in restoration as per factory spec etc, or just want to ride it?
If it has to be just so, then yes 550 katana ones are the same . But you will need to get a rebuild kit as if will have been standing about crystallising the fluid. And the brake switch will be buggered , although for MOT it isn't required for 1980's bikes.

If you just want to get on the road I bought a master cyl from e bay with modern brake switch ready to go for £20.
That said I have a 650 one here in very tidy condition but require a seal kit because it has been off a bike for a while , though I did clean it and store it.
Free to a club member + postage. ;)
CLUB Chairman


My Gallery

Ikirkham
Posts: 6
Joined: Sat Apr 06, 2019 6:16 am

Re: 1982 650 Front brake master cylinder

Post by Ikirkham » Mon Apr 08, 2019 8:29 pm

Thanks , appreciate the feedback and the info.....it would be great to get the proper one for the bike if you’re sure that you don’t need the one you have .....i’m quite happy to pay for it if you let me know how much?.... wouldn’t feel right to get it for free..
i’ve Seen plenty of kits available so it should be ok for me to sort it out.....
Bike will be ready for the road soon .....just an oil pressure switch , spray silver covers to clocks and finish repair the Marshall 4-1 !
Thanks

User avatar
fossie
Club Member
Posts: 4869
Joined: Sat Oct 23, 2010 9:16 pm
Has thanked: 139 times
Been thanked: 685 times

Re: 1982 650 Front brake master cylinder

Post by fossie » Mon Apr 08, 2019 8:44 pm

Just join the club £10 ....that'll get you access to sale and wants section , newsletters , discounts from suppliers and more areas of the website. Postage won't be much , I check in the garage in the next day or so.....I know where it is but it's more of a Kat cave than a garage, I 'll check it over and let you know for definite that it is there. Once I'm sure I'll send PayPal address so you can join and add say a fiver for post and packing (£15 in total.)
Cheers .
CLUB Chairman


My Gallery

Ikirkham
Posts: 6
Joined: Sat Apr 06, 2019 6:16 am

Re: 1982 650 Front brake master cylinder

Post by Ikirkham » Mon Apr 08, 2019 8:50 pm

No problem that would be great! ....wait to hear from you later. Thanks

User avatar
fossie
Club Member
Posts: 4869
Joined: Sat Oct 23, 2010 9:16 pm
Has thanked: 139 times
Been thanked: 685 times

Re: 1982 650 Front brake master cylinder

Post by fossie » Tue Apr 09, 2019 9:01 pm

Recovered from hibernation, complete with lever and brake switch. I will need to keep the front of the clamp but you must have one .
image.jpeg
image.jpeg
image.jpeg
.

Will send a PM with PayPal address etc. Let me know postal address on reply.
CLUB Chairman


My Gallery

User avatar
fossie
Club Member
Posts: 4869
Joined: Sat Oct 23, 2010 9:16 pm
Has thanked: 139 times
Been thanked: 685 times

Re: 1982 650 Front brake master cylinder

Post by fossie » Thu Apr 11, 2019 7:33 pm

Hello!
CLUB Chairman


My Gallery

User avatar
PaulD
Club Member
Posts: 1082
Joined: Mon Jan 01, 2018 5:48 pm
Location: Usually either the shed or bed
Has thanked: 513 times
Been thanked: 209 times

Re: 1982 650 Front brake master cylinder

Post by PaulD » Fri Apr 12, 2019 4:33 am

fossie wrote:Hello!
Hello :roll:
There rubbish them Jap bikes lad they won't last five minutes! you want to get yourself a nice Royal Enfield!
A quote from my old dad 8-)

I started out with nothing and I’ve got most of it left!
KOC member 453

User avatar
Kryten
Club Member
Posts: 1586
Joined: Sun Dec 26, 2010 11:13 pm
Location: North Norfolk
Has thanked: 95 times
Been thanked: 238 times

Re: 1982 650 Front brake master cylinder

Post by Kryten » Fri Apr 12, 2019 7:09 am

Hello! :D :D
Jim

750 SZ (Not So) Skruffy Kat
1000 SZ in bits
7/11 SZ Long term
T509 Back on the road!

It was a New Day yesterday but, by God, it's an Old Day now!

User avatar
pop-up
Club Member
Posts: 276
Joined: Thu Nov 11, 2010 5:44 pm
Has thanked: 11 times
Been thanked: 57 times

Re: 1982 650 Front brake master cylinder

Post by pop-up » Fri Apr 12, 2019 7:06 pm

:lol: Hello

Post Reply