Hi Guys, newbie here.
Building a GS650G shaft drive Katana from boxes of bits. I found the cam inspection covers are all missing. Anyone got a source for these, part number or are the the same as the ones on the GS1000/850 etc.
Cheers
GS650G Inspection Covers
-
fossie
- Club Member
- Posts: 4854
- Joined: Sat Oct 23, 2010 9:16 pm
- Has thanked: 136 times
- Been thanked: 681 times
Re: GS650G Inspection Covers
They are still available from Suzuki. They are NOT the same as any other of the GS range , as they bolt from underside and 550/750/850 / 1000 are screws on the out side.
However the whole of the 650 range are the same ...GS650 GT/GL/ Gx/GZ. ....check Yank sites as they had loads of the GL model.
However the whole of the 650 range are the same ...GS650 GT/GL/ Gx/GZ. ....check Yank sites as they had loads of the GL model.
Last edited by fossie on Wed Nov 06, 2019 11:58 pm, edited 1 time in total.
Re: GS650G Inspection Covers
These ones screw in from the side like the gs1000/850 but apparently are not the same.
-
fossie
- Club Member
- Posts: 4854
- Joined: Sat Oct 23, 2010 9:16 pm
- Has thanked: 136 times
- Been thanked: 681 times
Re: GS650G Inspection Covers
The ones listed by Johnr are 650 ones as they screw inside .....850 etc have 2 holes on the outside to screw on .
