Page 1 of 1
GS650G Inspection Covers
Posted: Wed Nov 06, 2019 12:59 pm
by Gumper
Hi Guys, newbie here.
Building a GS650G shaft drive Katana from boxes of bits. I found the cam inspection covers are all missing. Anyone got a source for these, part number or are the the same as the ones on the GS1000/850 etc.
Cheers
Re: GS650G Inspection Covers
Posted: Wed Nov 06, 2019 8:06 pm
by johnr
havent we had this discussion on oldskoolsuzuki?
Re: GS650G Inspection Covers
Posted: Wed Nov 06, 2019 8:07 pm
by fossie
They are still available from Suzuki. They are NOT the same as any other of the GS range , as they bolt from underside and 550/750/850 / 1000 are screws on the out side.
However the whole of the 650 range are the same ...GS650 GT/GL/ Gx/GZ. ....check Yank sites as they had loads of the GL model.
Re: GS650G Inspection Covers
Posted: Wed Nov 06, 2019 10:21 pm
by johnr
Re: GS650G Inspection Covers
Posted: Thu Nov 07, 2019 2:33 pm
by Gumper
These ones screw in from the side like the gs1000/850 but apparently are not the same.
Re: GS650G Inspection Covers
Posted: Thu Nov 07, 2019 2:34 pm
by Gumper
johnr wrote: ↑Wed Nov 06, 2019 8:06 pm
havent we had this discussion on oldskoolsuzuki?
I thought that I would also try here.
Re: GS650G Inspection Covers
Posted: Thu Nov 07, 2019 2:41 pm
by Gumper
Re: GS650G Inspection Covers
Posted: Thu Nov 07, 2019 9:49 pm
by fossie
The ones listed by Johnr are 650 ones as they screw inside .....850 etc have 2 holes on the outside to screw on .
