Airfilter adapter
- fossie
- Club Member
- Posts: 4869
- Joined: Sat Oct 23, 2010 9:16 pm
- Has thanked: 139 times
- Been thanked: 684 times
Airfilter adapter
The airfilter for the 400/ 250 Kat is 13780-45D00. Which is available but can be a while to arrive .
The alternative is to buy a GS 500 ( twin) airfilter 13780 01D51 and use one of our trumpets that simply fits in the top and you can adjust to suit .
This item obviously can be reused in next filter saving in the long run .
£15 incl postage buys the trumpet .
The alternative is to buy a GS 500 ( twin) airfilter 13780 01D51 and use one of our trumpets that simply fits in the top and you can adjust to suit .
This item obviously can be reused in next filter saving in the long run .
£15 incl postage buys the trumpet .
- Uncle Bob
- Site Admin
- Posts: 1681
- Joined: Mon Nov 26, 2012 12:05 pm
- Location: Norwich, Norfolk
- Has thanked: 639 times
- Been thanked: 232 times
- Contact:
- fossie
- Club Member
- Posts: 4869
- Joined: Sat Oct 23, 2010 9:16 pm
- Has thanked: 139 times
- Been thanked: 684 times
-
- Club Member
- Posts: 894
- Joined: Mon Nov 16, 2020 10:40 pm
- Has thanked: 34 times
- Been thanked: 114 times
Re: Airfilter adapter
What exactly is the purpose of the trumpet? It can't be to tune the intake length?
GSX250SS Tinykat (gone, but the hole in my wallet not forgotten)
GSX400SS Smallkat
GT250 X7
GT200 X5
BMW R1250R
GSX400SS Smallkat
GT250 X7
GT200 X5
BMW R1250R
- fossie
- Club Member
- Posts: 4869
- Joined: Sat Oct 23, 2010 9:16 pm
- Has thanked: 139 times
- Been thanked: 684 times
Re: Airfilter adapter
It is to increase the volume pressure intake .
If you slip the trumpet in the filter all the way out and start the engine it sucks it down adding pressure through the filter to the carbs.
When I first got my 400 filters weren't available and we hadn't made the aftermarket adapters , I just found a connection from an old VAX Hoover was the correct diameter and cut it to length...adjusted it a few times, it was still there when I rehomed it 120,000 later .
There was a flat spot without it , gone with it ....until the carbs wore out, literally ..
If you slip the trumpet in the filter all the way out and start the engine it sucks it down adding pressure through the filter to the carbs.
When I first got my 400 filters weren't available and we hadn't made the aftermarket adapters , I just found a connection from an old VAX Hoover was the correct diameter and cut it to length...adjusted it a few times, it was still there when I rehomed it 120,000 later .
There was a flat spot without it , gone with it ....until the carbs wore out, literally ..
-
- Club Member
- Posts: 894
- Joined: Mon Nov 16, 2020 10:40 pm
- Has thanked: 34 times
- Been thanked: 114 times
Re: Airfilter adapter
I better have one then. Same paypal address as for membership?
GSX250SS Tinykat (gone, but the hole in my wallet not forgotten)
GSX400SS Smallkat
GT250 X7
GT200 X5
BMW R1250R
GSX400SS Smallkat
GT250 X7
GT200 X5
BMW R1250R
-
- Posts: 11
- Joined: Sat Aug 27, 2022 8:38 pm
- fossie
- Club Member
- Posts: 4869
- Joined: Sat Oct 23, 2010 9:16 pm
- Has thanked: 139 times
- Been thanked: 684 times
Re: Airfilter adapter
Oooh nearly missed this post ....yep same PayPal address , PM me with postal address please ...I know I've had it once but we cannot assume it'll be the same ...
So now only 1 left .