Metalworking tools.
-
outrage
Metalworking tools.
Anyone know where i can buy a heel dollie and some tools for sheet metalworking? I've seen kits on Frost but its more than i need. Also my snips have a serrated edge which i dont like. Where can i find smooth cutting snips?
-
Katgeezer
- Posts: 909
- Joined: Thu Dec 23, 2010 4:02 pm
- Location: Orpington,Kent
- Has thanked: 6 times
- Been thanked: 8 times
Re: Metalworking tools.
Not sure about the dollie but snips and the like are available at Machine Mart.
Nearest branch for you is probably the new one in Blackfen.
Nearest branch for you is probably the new one in Blackfen.
TOO MUCH IS NEVER ENOUGH
THE VULTURE WILL STRIKE
Chris KOC154
Lost count........
THE VULTURE WILL STRIKE
Chris KOC154
Lost count........
-
nokatanayet
Re: Metalworking tools.
look on ebay for dollies etc, as for you snips ,take them apart and grind or stand them smooth, i work on aircraft everyday and they work fine even after grinding.
Re: Metalworking tools.
Won't they melt???nokatanayet wrote:look on ebay for dollies etc, they work fine even after grinding.
KOCUK 046 Jez
I'm not a complete idiot...................... some parts are missing!!!!!!!!
_____________________________________________________________________
GSX750S3 ANATAK, GSX400SSN, GSX400 MK2 Impulse frame & an almost complete pile of 400 Kat parts to build a hybrid!! GS650G x 1 3/4...........
to be continued
My Gallery
I'm not a complete idiot...................... some parts are missing!!!!!!!!
_____________________________________________________________________
GSX750S3 ANATAK, GSX400SSN, GSX400 MK2 Impulse frame & an almost complete pile of 400 Kat parts to build a hybrid!! GS650G x 1 3/4...........
to be continued
My Gallery
-
nokatanayet
Re: Metalworking tools.
Katman wrote:Won't they melt???nokatanayet wrote:look on ebay for dollies etc, they work fine even after grinding.
there's a man talking from experience
