A place to kick back and talk about anything and everything.
-
Katgeezer
- Posts: 909
- Joined: Thu Dec 23, 2010 4:02 pm
- Location: Orpington,Kent
- Has thanked: 6 times
- Been thanked: 8 times
Post
by Katgeezer » Tue Oct 02, 2012 6:15 pm
That's soooo mad
Seems torque reaction might be a problem looking at some of the other videos. Would love to see it move under it's own power but I take it they're still looking for a transmission.
TOO MUCH IS NEVER ENOUGH
THE VULTURE WILL STRIKE
Chris KOC154
Lost count........
-
callyboy
Post
by callyboy » Tue Oct 02, 2012 7:17 pm
Mental
Pete
-
Pedda
- Club Member
- Posts: 1507
- Joined: Mon Oct 25, 2010 11:21 am
- Location: Stadtlohn, Germany
- Has thanked: 52 times
- Been thanked: 199 times
Post
by Pedda » Tue Oct 02, 2012 10:51 pm
Katgeezer wrote: Would love to see it move under it's own power but I take it they're still looking for a transmission.
The transmission goes on the front wheel.
-
DEANOTEK
- Club Member
- Posts: 62
- Joined: Fri Jan 14, 2011 2:13 pm
- Location: BARNSLEY
- Been thanked: 1 time
Post
by DEANOTEK » Fri Oct 05, 2012 6:51 pm
Hmm,,, looks like it will fly through emissions test too..

Because the tester will probably be dead before the end of the test..

-
Katgeezer
- Posts: 909
- Joined: Thu Dec 23, 2010 4:02 pm
- Location: Orpington,Kent
- Has thanked: 6 times
- Been thanked: 8 times
Post
by Katgeezer » Sat Oct 06, 2012 9:15 am
Thunderbirds are GO......

TOO MUCH IS NEVER ENOUGH
THE VULTURE WILL STRIKE
Chris KOC154
Lost count........
-
harriskat
- Posts: 170
- Joined: Sat Jun 04, 2011 7:33 pm
Post
by harriskat » Sat Oct 06, 2012 9:34 am
Could you imagine bombing down the motorway on that and everyone thinking it was a low flying 747. AWESOME!!!!!!
-
johnr
- Club Member
- Posts: 3020
- Joined: Sun Oct 24, 2010 9:58 pm
- Location: lancashire
- Has thanked: 233 times
- Been thanked: 342 times
Post
by johnr » Sat Oct 06, 2012 3:44 pm
ahhhhhh, right, ive been oing through the build vids. its actually, or it appears to be, driv en by a hydraulic drive to the front wheel using a similar drive setup to a jcb digger (theyre hydraulically driven) thus doing away for gearboxes shafts chains sprockets bevel drives etc. i assume theres a bypass for tickover and then you just close the bypass instead of releasing the clutch. bonkers thing!