gasket set
-
callyboy
gasket set
need quite a few gaskets for my pop up. Might as well get a full set.I see there is a full set on ebay for £100. Anyone know anywhere cheaper please ?
Thanks
Pete
Thanks
Pete
-
Pop-Kat
Re: gasket set
There's a head gasket on ebay now i think, look under gsx750.
Pattern parts ok for most stuff but original is best for head and base.
Give robinsons a shout i think the gaskets you'll need are cheaper than you think..
gen cover, clutch cover, top brather cover..you shouldn't need the cam cover seal, but that won't be in any gasket st anyway.. you will need new rubber washers for all your cam cover bolts though, and again these won't be in a gasket set.
Pattern parts ok for most stuff but original is best for head and base.
Give robinsons a shout i think the gaskets you'll need are cheaper than you think..
gen cover, clutch cover, top brather cover..you shouldn't need the cam cover seal, but that won't be in any gasket st anyway.. you will need new rubber washers for all your cam cover bolts though, and again these won't be in a gasket set.
-
callyboy
Re: gasket set
cheers Mal, will have a look. I need the genny cover and ignition cover ones.Plus zorst gaskets and cam cover and sump ones.Is it worth buying a whole set do you think? Do I need camcover bolt ones as well then?
Pete
Pete
- Katgeezer
- Posts: 909
- Joined: Thu Dec 23, 2010 4:02 pm
- Location: Orpington,Kent
- Has thanked: 6 times
- Been thanked: 8 times
Re: gasket set
Those gaskets would be perfectly ok from a pattern set so price up Suzook OEM ones individually and you'll probably find you can get a complete pattern set for the same price. Don't forget that those particular ones would be the same as ES so it helps widen your search a bit.
TOO MUCH IS NEVER ENOUGH
THE VULTURE WILL STRIKE
Chris KOC154
Lost count........
THE VULTURE WILL STRIKE
Chris KOC154
Lost count........
-
callyboy
Re: gasket set
cheers chris. do i need to use new cam cover bolt ones?
Thanks
will prob get a whole set and flog the rest if anyone wants them.
Pete
Thanks
will prob get a whole set and flog the rest if anyone wants them.
Pete
- johnr
- Club Member
- Posts: 3022
- Joined: Sun Oct 24, 2010 9:58 pm
- Location: lancashire
- Has thanked: 234 times
- Been thanked: 342 times
Re: gasket set
http://www.ebay.co.uk/itm/80-82-SUZUKI- ... 1e7384d534" onclick="window.open(this.href);return false;
any use. look at his other stuff, he has loads of kit and its very very cheap!
any use. look at his other stuff, he has loads of kit and its very very cheap!
-
callyboy
Re: gasket set
cheers John, I got a set earlier today. Its not complete but should have most of what i want. £34
Pete
Pete
-
Pop-Kat
Re: gasket set
I'd be surprised if the cam cover seal is in any gasket set, but check. IMO you will need the cam cover bolt rubber washers, they go rock hard over the years. Do your research Pete, you only need 3 or 4 paper gaskets so may be cheaper to buy genuine. Exhaust gaskets are cheap on eBay one size fits many makes and models of bike.
-
callyboy
Re: gasket set
I got this one Mal:
http://www.ebay.co.uk/itm/221177513912? ... 1497.l2649" onclick="window.open(this.href);return false;
Looks like it has zorst ones as well.
Pete
http://www.ebay.co.uk/itm/221177513912? ... 1497.l2649" onclick="window.open(this.href);return false;
Looks like it has zorst ones as well.
Pete
-
Pop-Kat
