Page 1 of 2

Suzuki Katana Endurance Racer Build at NEC

Posted: Tue Nov 08, 2016 9:33 pm
by Uncle Bob
Just noticed this at the NEC Bike show this year:

http://www.motorcyclelive.co.uk/feature ... cer-build/

Might be worth noting dates for the Endurance Legends event at Donington Park next May to see it in action...

Re: Suzuki Katana Endurance Racer Build at NEC

Posted: Wed Nov 09, 2016 2:47 pm
by Kryten
Had seen that before on the pre-phoenix site. The dates clash perfectly with my next visitation to the North Sea, otherwise I would be there.

6th and 7th of May next year for the race

Re: Suzuki Katana Endurance Racer Build at NEC

Posted: Wed Nov 09, 2016 8:10 pm
by spondonchris
won't be going to the rip off NEC, which is a shame as it would be nice to see the katana build, but I think the endurance weekend would be good to go to. Racing and track stuff is always better than shows. Donnington classic festival every August is a great combination of both.

Re: Suzuki Katana Endurance Racer Build at NEC

Posted: Sun Nov 13, 2016 6:49 am
by Cat
The guys from Suzuki who are building this did contact me and it was on the old forum.
Pretty sure someone will go and take pics ...

Re: Suzuki Katana Endurance Racer Build at NEC

Posted: Mon Nov 28, 2016 10:06 pm
by Nicky Dodds
Quite pretty...

Re: Suzuki Katana Endurance Racer Build at NEC

Posted: Mon Nov 28, 2016 10:38 pm
by geekay
wonder where they got that tail piece / side cover combo from?

Re: Suzuki Katana Endurance Racer Build at NEC

Posted: Mon Nov 28, 2016 10:43 pm
by Nicky Dodds
image.jpg
image.jpg
image.jpg
image.jpg
image.jpg

Re: Suzuki Katana Endurance Racer Build at NEC

Posted: Mon Nov 28, 2016 10:51 pm
by Nicky Dodds
image.jpg
image.jpg
Frame is made from scratch so not an original...same with swingarm.
Fork tubes are 600 bandit with custom made legs complete with non-working anti-dive in keeping with the original look.
Nice looking dymag wheels and you can literally lift that racefit pipe with two fingers.
I went on the final day and they had one bike on display and another on the bench.
Maybe not evident from these crap photos but it had a fair bit of frame bracing behind the headstock.

Re: Suzuki Katana Endurance Racer Build at NEC

Posted: Mon Nov 28, 2016 11:00 pm
by Nicky Dodds
As a footnote I think Nigel and Porky have better looking bikes.
As do Deanotek, FBJ, and Jimmy400 :D

Re: Suzuki Katana Endurance Racer Build at NEC

Posted: Tue Nov 29, 2016 10:19 pm
by sparki
no idea why they stuck on that bit of braided line between the inlet and exhaust cam...