inspiration
- lomsavage
- Posts: 763
- Joined: Sat Oct 23, 2010 5:29 pm
- Location: stalyvegas
- Has thanked: 3 times
- Been thanked: 28 times
inspiration
hi folk,
when is enough enough,
am at the point of saying sod all this project stuff, i can't be arsed !!!
have no enthusiasm to sort one in garage, and less for one in dining room
i could prob get quite a wedge for what i have in parts
words of encouragement needed
H
when is enough enough,
am at the point of saying sod all this project stuff, i can't be arsed !!!
have no enthusiasm to sort one in garage, and less for one in dining room
i could prob get quite a wedge for what i have in parts
words of encouragement needed
H
Hello from H
"Sponsered By Typhoo and P G Tips and (now) Aprilia also"
No Kats and unlikely to ever have one again
(hey ho, that is what life throws at us)
"Sponsered By Typhoo and P G Tips and (now) Aprilia also"
No Kats and unlikely to ever have one again
-
callyboy
Re: inspiration
Right - if you dont get cracking on those fine pieces of machinery you might end up like me
Seriously H. If you dont feel like doing anything then just leave it till you do. Unless you need the money just tinker when you feel the urge
Have a couple of beers and you should be ok. Beer googles are wonderful things.
Pete
Seriously H. If you dont feel like doing anything then just leave it till you do. Unless you need the money just tinker when you feel the urge
Have a couple of beers and you should be ok. Beer googles are wonderful things.
Pete
-
nokatanayet
Re: inspiration
H, get on with it or we are sending pete up
no,seriously ,pete is right,leave it for a while until your ready to attack it again.
i sold alot of stuff years ago and when i got back into doing up bikes it cost me a hell of alot more and as you know parts are getting harder to find.
just chill for while
no,seriously ,pete is right,leave it for a while until your ready to attack it again.
i sold alot of stuff years ago and when i got back into doing up bikes it cost me a hell of alot more and as you know parts are getting harder to find.
just chill for while
Re: inspiration
Put them both in a place you wont see them, then go to some shows and see the finished article, you'll soon come home and want to crack on. I know how you feel and seeing others bikes or cars always gets me back in the garage.
Worst case, sell 1 and put all your effort into getting the other finished.
Worst case, sell 1 and put all your effort into getting the other finished.
GSX1100SZ
RD500LC
RD250LC
VF1000R
XZ550 (needs the new exhausts fitting)
VF500F2 (needs the owner to stop going on ebay)
KE 125 1976
KOCUK 316
RD500LC
RD250LC
VF1000R
XZ550 (needs the new exhausts fitting)
VF500F2 (needs the owner to stop going on ebay)
KE 125 1976
KOCUK 316
- Pedda
- Club Member
- Posts: 1516
- Joined: Mon Oct 25, 2010 11:21 am
- Location: Stadtlohn, Germany
- Has thanked: 53 times
- Been thanked: 198 times
Re: inspiration
What is your option? Sell everything? Hahahahahahahaha
Do things on your bikes as you want to.
Do things on your bikes as you want to.
-
callyboy
Re: inspiration
copied it alreadynokatanayet wrote:did i say pete was right,can i edit that ?
Pete
- Cat
- Posts: 1473
- Joined: Sun Oct 24, 2010 12:13 pm
- Location: Southern
- Has thanked: 14 times
- Been thanked: 15 times
Re: inspiration
I would offer to sort you out but I get the impression that would have the opposite effect. Lol
Seriously though, just leave it a while and do the stuff you want to do. It will still be there another day.
Seriously though, just leave it a while and do the stuff you want to do. It will still be there another day.
-
FBJ
- Posts: 667
- Joined: Wed Nov 10, 2010 7:31 pm
- Location: peterborough
- Has thanked: 5 times
- Been thanked: 31 times
Re: inspiration
H. Make one of them uncomplicated and as straight forward as possible. Maybe not even worry about shinney. Then u have somethin to ride. And will see progress. Then chill on the other. If u need a hand u know where I am. Happy to muc in. U could POP over for a night or 2 with stuff in the boot and we could get some bits done
-
FBJ
- Posts: 667
- Joined: Wed Nov 10, 2010 7:31 pm
- Location: peterborough
- Has thanked: 5 times
- Been thanked: 31 times
Re: inspiration
Oh an forgot to say don't look at it as a huge project t. Look at it as loads of little o.es. for example front brakes only work on them till u are happy. When done project finished. Then do both wheels. Painting polishing. Before u know it u can assemble a completed front end and it will be very rewarding. Little bits can be done quick an look good
