Free Viton O Rings for 550 / 650 / 750 /1100 Petrol Feeds on Carbs

From a simple dustcap to a full on turbo-nitrous breathing monster.
If you have any questions, here's the place to ask.
Post Reply
User avatar
Uncle Bob
Site Admin
Posts: 1789
Joined: Mon Nov 26, 2012 12:05 pm
Location: Norwich, Norfolk
Has thanked: 621 times
Been thanked: 232 times
Contact:

Free Viton O Rings for 550 / 650 / 750 /1100 Petrol Feeds on Carbs

Post by Uncle Bob » Fri Nov 30, 2018 5:41 pm

Initially posted in the members only section, but as only 1 taker, I still have 2 sets left so offering to the wider public!

12 * Viton O Ring 6.35mm x 1.78mm (2 sets available)

On the carbs the pipes that join each individual carb to feed the petrol between them (between 1 and 2 and 3 and 4) and the T piece where the petrol comes in (between 2 and 3) have 4 of these O rings on each so 12 in total and they are not parts Suzuki supply. Over time I have found those O rings degrade and can leak petrol. So these 12 O rings will replace all of those with Ethanol resistant Viton ones.

There are 2 sets on offer posted FoC.

Thanks goes to PaulD for these as he initially bought 72 as a minimum order for his carbs and sent me the rest ( I needed 24 for the Swiss 1100 and a spare set of carbs I have ), so I am passing on the rest. I know they go on the 1100 and assume the others will be the same.

UB

User avatar
pop-up
Posts: 276
Joined: Thu Nov 11, 2010 5:44 pm
Has thanked: 10 times
Been thanked: 57 times

Re: Free Viton O Rings for 550 / 650 / 750 /1100 Petrol Feeds on Carbs

Post by pop-up » Fri Nov 30, 2018 5:57 pm

Hi UB, could I have a set please. PM sent. cheers.

User avatar
Uncle Bob
Site Admin
Posts: 1789
Joined: Mon Nov 26, 2012 12:05 pm
Location: Norwich, Norfolk
Has thanked: 621 times
Been thanked: 232 times
Contact:

Re: Free Viton O Rings for 550 / 650 / 750 /1100 Petrol Feeds on Carbs

Post by Uncle Bob » Fri Nov 30, 2018 6:06 pm

That's 1 set for Paul, so only one set left now.

User avatar
Nicky Dodds
Club Member
Posts: 676
Joined: Fri Nov 01, 2013 9:25 pm
Location: Selby, North Yorkshire
Has thanked: 134 times
Been thanked: 45 times

Re: Free Viton O Rings for 550 / 650 / 750 /1100 Petrol Feeds on Carbs

Post by Nicky Dodds » Sat Dec 01, 2018 1:17 pm

Am I eligible?
GSX1100SD
GS550MX.....5 year old grandaughter thinks it's hers!

User avatar
Uncle Bob
Site Admin
Posts: 1789
Joined: Mon Nov 26, 2012 12:05 pm
Location: Norwich, Norfolk
Has thanked: 621 times
Been thanked: 232 times
Contact:

Re: Free Viton O Rings for 550 / 650 / 750 /1100 Petrol Feeds on Carbs

Post by Uncle Bob » Sat Dec 01, 2018 9:59 pm

Nicky Dodds wrote:Am I eligible?
Yeah, 'course you are - I put them in members area first but only 1 taker so offering other 2 sets to everyone now.

PM me your address and I'll post.

So now they are all gone (Paul and Nicky)!

UB

User avatar
Nicky Dodds
Club Member
Posts: 676
Joined: Fri Nov 01, 2013 9:25 pm
Location: Selby, North Yorkshire
Has thanked: 134 times
Been thanked: 45 times

Re: Free Viton O Rings for 550 / 650 / 750 /1100 Petrol Feeds on Carbs

Post by Nicky Dodds » Sun Dec 09, 2018 11:50 am

Came yesterday Rob much appreciated mukka.
GSX1100SD
GS550MX.....5 year old grandaughter thinks it's hers!

User avatar
pop-up
Posts: 276
Joined: Thu Nov 11, 2010 5:44 pm
Has thanked: 10 times
Been thanked: 57 times

Re: Free Viton O Rings for 550 / 650 / 750 /1100 Petrol Feeds on Carbs

Post by pop-up » Mon Dec 10, 2018 5:42 pm

Arrived today Rob. Thanks again butty.

User avatar
Uncle Bob
Site Admin
Posts: 1789
Joined: Mon Nov 26, 2012 12:05 pm
Location: Norwich, Norfolk
Has thanked: 621 times
Been thanked: 232 times
Contact:

Re: Free Viton O Rings for 550 / 650 / 750 /1100 Petrol Feeds on Carbs

Post by Uncle Bob » Mon Dec 10, 2018 5:48 pm

Glad you both got them OK, Rob

Post Reply