Page 1 of 1
Re: Oil take off plate
Posted: Tue Nov 13, 2012 10:13 pm
by Pedda
The take offs you mentioned are the easy and cheaper option. Just make sure you have an EFE filter cover or modify your Katana cover with a plug to have it working like an EFE cover.
Re: Oil take off plate
Posted: Wed Nov 14, 2012 6:58 pm
by Pedda
Yes.
Re: Oil take off plate
Posted: Wed Nov 14, 2012 10:26 pm
by Pop-Kat
At least one EFE engine being broken on abay at the moment, easier to just buy an EFE cover and use that, or give grumpy a shout he might have one.
Re: Oil take off plate
Posted: Thu Nov 15, 2012 11:41 am
by sparki
.... or you can block the oil gallery in the motor behind the oil cover for the same effect as changing/modifying the cover itself. doesn't need to be a 100% block but good enough to reroute the flow
Re: Oil take off plate
Posted: Sat Nov 17, 2012 1:31 pm
by KeKat
Hi
This is where I got my info on Kat oil coolers.
http://www.theflyingbanana.com/oil-cooler.htm" onclick="window.open(this.href);return false;
keith
Re: Oil take off plate
Posted: Sat Nov 17, 2012 6:28 pm
by sparki
good site that explians it all.... if you can get an efe cover thats cool... if not, just plug the hole and use the std cover. simple eh
Re: Oil take off plate
Posted: Mon Nov 19, 2012 9:56 pm
by johnr
pluging the hole under the cover blocks the oils path and forces it up the oil cooler outlet on one side of the cover.