Katana Owners Club U.K.

Very easy no need to strip forks either, just remove said fork/s and remove dust cover/s, then pop out spring retainer and drive 2/3 small long self tapping screws into seal and gently pull it up with pliers or grips out of fork tube, if in doubt tape card around tanchions to protect.

plenty on ebay, just make sure you get right year and model

What i also should of said is are the stanchions free from rust pits and scratches on the area of seal travel , because if not then new seals won't last long

As long as its a 1982 Suzuki GXS750S Katana with standard forks should be these

http://www.ebay.co.uk/itm/Pyramid-Parts ... 374wt_1051" onclick="window.open(this.href);return false;

or seals and dust caps

http://www.ebay.co.uk/itm/Pyramid-Parts ... 459wt_1051" onclick="window.open(this.href);return false;


but to double check measure to see if stanchions are 35mm

i thought the 750 1000 and 1100 were all the same.... my forks, 750, are 37mm

Steve they are but i think he got confused over the 750 options

Fit genuine Suzuki seals or you'll be fitting another set in no time at all!