Katana Owners Club U.K.

Help please!!
Where is the best place to buy a full set of carb inlet rubbers for my 1981 550M? Apart from eBay..... Any help appreciated

Robinsons foundry stock a fairly comprehensive selection of classic Suzuki parts or you could try Slingers Suzuki in Preston. Suzuki classic spares on eBay are pretty good too

I'll see if I can find the part numbers for them. Once you have those it's easier to Google and find them. Can't do at the moment though as out! Check back in a day or 2.

Thanks

UB

Hi.

From Robinsons Foundary website:

19 RH INTAKE PIPE (13110-47010)

20 LH INTAKE PIPE (13120-47010)

Both listed as £54.87 each. Need to replace the O ring at the same time they are:

23 O RING (09280-38004)
Old Part Number 09280-38003 £2.66

The screen shot and part numbers are for the '81 GS550 EX


I used to have a 550MX in the dim and distant past

Don't forget to post up in "Say Hello" and post some pictures. We like pictures

Thanks for getting the part numbers Kryten, saved me a job! They are the same as the GS650 btw.

Using those then they are shown at AJ Sutton (Fossie got some 650 ones there) for £30 but it isn't clear if they have them or just list the parts, you might have to call - https://www.ajsutton.co.uk/genuineparts ... head?uID=0

Else I would probably use CMSNL in Holland as they show as €32 there https://www.cmsnl.com/products/pipe-int ... Ufqj-hKiUm and https://www.cmsnl.com/products/pipeinta ... UfqvOhKiUk

If they are NOS then Ebay is OK to use.

UB