816 carb jetting question

From a simple dustcap to a full on turbo-nitrous breathing monster.
If you have any questions, here's the place to ask.
Post Reply
User avatar
BigLT
Club Member
Posts: 175
Joined: Wed Jan 05, 2011 10:18 am
Location: Hampshire
Has thanked: 1 time
Been thanked: 3 times

816 carb jetting question

Post by BigLT » Wed Jun 10, 2020 4:38 pm

Hello again, straight back in with the pleas for help, sorry.

I have a 750 with an 816 Wiseco kit, standard carbs, marving 'racing' exhaust and pod filters.

Firstly, I know it would be easier to use the standard airbox and there is likely to be a lot of messing about to get it right...

Please can anyone tell me what might be a good baseline for carb jets. I know this is an unusual set up, but I have no experience of this and I am hoping that someone can get me somewhere in the right county, if not in the right ballpark.

thanks in advance.
Top
User avatar
Uncle Bob
Site Admin
Posts: 1769
Joined: Mon Nov 26, 2012 12:05 pm
Location: Norwich, Norfolk
Has thanked: 602 times
Been thanked: 229 times
Contact:
Contact Uncle Bob

Re: 816 carb jetting question

Post by Uncle Bob » Wed Jun 10, 2020 6:01 pm

I believe Steve (KatMarch on here) has the 816 kit (or similar) and has just sorted his carbs after a rebuild. I would PM him and ask.
Top
User avatar
BigLT
Club Member
Posts: 175
Joined: Wed Jan 05, 2011 10:18 am
Location: Hampshire
Has thanked: 1 time
Been thanked: 3 times

Re: 816 carb jetting question

Post by BigLT » Thu Jun 11, 2020 9:17 am

Thanks Both,
I'll get in touch - maybe he tried standard things first....
Top
Post Reply

Return to “Technical Q&A”