Hypocrite or coming over to the shiney side. 750 s3
- Katfish
- Club Member
- Posts: 345
- Joined: Wed Nov 10, 2010 4:12 pm
- Location: York
- Has thanked: 21 times
- Been thanked: 25 times
- fossie
- Club Member
- Posts: 4869
- Joined: Sat Oct 23, 2010 9:16 pm
- Has thanked: 139 times
- Been thanked: 683 times
Re: Hypocrite or coming over to the shiney side. 750 s3
Found a touch of time to get my a*se in to gear, it may be low ratio crawler gear but it is a gear.....!
I will add a clear coat before they are put back together.
Did you know that milk container tops are the correct size to block brake piston holes . Aswell as inlet and exhaust on Kats?
I will add a clear coat before they are put back together.
Did you know that milk container tops are the correct size to block brake piston holes . Aswell as inlet and exhaust on Kats?
Re: Hypocrite or coming over to the shiney side. 750 s3
Good work looking very good
KOC 49
Are you sure it's a Kat? Kat engine, Kat clocks, Kat wheels and forks? Mmm! It's not silver is it!
Are you sure it's a Kat? Kat engine, Kat clocks, Kat wheels and forks? Mmm! It's not silver is it!
Re: Hypocrite or coming over to the shiney side. 750 s3
its about time fossie you got on with it,
how many others have pop-up projects just lying around doing nothing
keep up the good work mate
how many others have pop-up projects just lying around doing nothing
keep up the good work mate
- fossie
- Club Member
- Posts: 4869
- Joined: Sat Oct 23, 2010 9:16 pm
- Has thanked: 139 times
- Been thanked: 683 times
Re: Hypocrite or coming over to the shiney side. 750 s3
This was clearly one of THE WORST DECISIONS I HAVE MADE!.
How does anyone find any enjoyment spending countless hours refitting things that were only taken apart because it needed to sent to a powder coaters. I mean bearings need to cme out because they would be gash if they remained in place during the process. Then to refit the bearing you have to be so **********careful not to chip other wise it was a waste of time and money..........
NEVER EVER EVER , will I ever do this again .
What a total waste of a weekend and money . Rattle cans and smooth rite from now on .
Kats are for riding not polishing ..........................aaaaaaaaaaaAaaaaaaaaaaaaaaaAAAAAAAAAAAAAAAGH!
How does anyone find any enjoyment spending countless hours refitting things that were only taken apart because it needed to sent to a powder coaters. I mean bearings need to cme out because they would be gash if they remained in place during the process. Then to refit the bearing you have to be so **********careful not to chip other wise it was a waste of time and money..........
NEVER EVER EVER , will I ever do this again .
What a total waste of a weekend and money . Rattle cans and smooth rite from now on .
Kats are for riding not polishing ..........................aaaaaaaaaaaAaaaaaaaaaaaaaaaAAAAAAAAAAAAAAAGH!
- Katgeezer
- Club Member
- Posts: 909
- Joined: Thu Dec 23, 2010 4:02 pm
- Location: Orpington,Kent
- Has thanked: 6 times
- Been thanked: 8 times
Re: Hypocrite or coming over to the shiney side. 750 s3
hehehehehehehehehehe.......
TOO MUCH IS NEVER ENOUGH
THE VULTURE WILL STRIKE
Chris KOC154
Lost count........
THE VULTURE WILL STRIKE
Chris KOC154
Lost count........
Re: Hypocrite or coming over to the shiney side. 750 s3
Fantastic motivational words from the man who' s idea it is to do the group popup
Just wait til you get it finished and find out you've become a fair weather rider 'cause you don' t want to get your super shiny restored bike wet and dirty
Just wait til you get it finished and find out you've become a fair weather rider 'cause you don' t want to get your super shiny restored bike wet and dirty
- fossie
- Club Member
- Posts: 4869
- Joined: Sat Oct 23, 2010 9:16 pm
- Has thanked: 139 times
- Been thanked: 683 times
Re: Hypocrite or coming over to the shiney side. 750 s3
Not chance of that, just ordered another scabby link arm off ebay ''cos had enough of fannying about with this one , black smoothrite , The fairing will now remain cracked and scratched not chucking money at a bike just so I can't ride it.arnica2612 wrote:Fantastic motivational words from the man who' s idea it is to do the group popup
Just wait til you get it finished and find out you've become a fair weather rider 'cause you don' t want to get your super shiny restored bike wet and dirty
Lets face it the machine is worth the roughly the same weather the frame is fantasically clean or not and I will never sell it anyway.
No I thought I'd give this resto thing we read about in mags a go. Much overrated hobby taken up by people with more money , patience, time and motivation than I . Definatley not something I would consider again. At 53 I'll have snuffed it by the time this gets finished!
-
- Club Member
- Posts: 159
- Joined: Fri Dec 31, 2010 6:21 pm
- Location: Strete,Devon
- Has thanked: 3 times
- Been thanked: 7 times
Re: Hypocrite or coming over to the shiney side. 750 s3
I agree with your sentiments Fossie. My 650 ended up being a restoration because bearing let go in gearbox and one thing led to another. I'm not finished but light and end of tunnel is slowly getting nearer. I just want to ride my bike so why's me master cylinder decided to go u/s on me.