Page 4 of 5
Re: SKELLYS KATANA INJECTION PROJECT
Posted: Tue Jan 10, 2017 7:16 pm
by skelly
Finished the stainless zorst.
I'm pretty happy with it and I can fit a lambda sensor in it too.
Re: SKELLYS KATANA INJECTION PROJECT
Posted: Tue Jan 10, 2017 7:18 pm
by skelly
Started work on the fuel rail.
The original GPZ one is no good as it has 4 tails on it to connect to the old style injectors.
I used a fuel rail from a h***a CBR thingy but to be honest anything would have done as long as it has the sockets to fit the GSX1400 injectors which incidentally fit straight in to the GPZ throttle bodies.
Obviously the spacing was all to cock so I sawed it up and have started to tig the bits back together again, also cut some 8mm tails off a dead EXUP pump so they will be the inlet & outlets.
Re: SKELLYS KATANA INJECTION PROJECT
Posted: Tue Jan 10, 2017 7:21 pm
by skelly
End result.
A fuel rail that fits n dont leak..
Re: SKELLYS KATANA INJECTION PROJECT
Posted: Tue Jan 10, 2017 8:38 pm
by stockcar
Looking neat
Re: SKELLYS KATANA INJECTION PROJECT
Posted: Wed Jan 11, 2017 10:32 am
by sparki
don't mess around then! - going to be lovely isnt it....
Re: SKELLYS KATANA INJECTION PROJECT
Posted: Thu Jan 12, 2017 5:29 pm
by skelly
Cheers guys.
Hopefully it will be ok.
Re: SKELLYS KATANA INJECTION PROJECT
Posted: Sat Jan 14, 2017 4:34 pm
by skelly
After a bit of a break from things over the festive season I have started to make my wiring loom.
Re: SKELLYS KATANA INJECTION PROJECT
Posted: Fri Jul 28, 2017 8:21 pm
by skelly
Its finished,
I'm pretty happy with it.
130bhp & 92 lbft at the wheel.
Re: SKELLYS KATANA INJECTION PROJECT
Posted: Fri Jul 28, 2017 8:49 pm
by johnr
im gonna have to go back to the start and read this again to try and get my head round it.
Re: SKELLYS KATANA INJECTION PROJECT
Posted: Fri Jul 28, 2017 9:03 pm
by skelly
johnr wrote:im gonna have to go back to the start and read this again to try and get my head round it.
Theres loads more to it than I have put on here.
the full build is on the OSS forum and can be found here.
http://oldskoolsuzuki.info/forums/index ... t-rebuild/&
I started to write the thread on the oss forum before I discovered this one.
Cheers.
Skel..