http://www.yo*t*be.com/watch?v=3YfTtGCsiD8&feature=youtu.be" onclick="window.open(this.href);return false;
Not sure if youtube links allowed?
Anyone good with a lathe?
Anyone good with a lathe?
Then check this out
http://www.yo*t*be.com/watch?v=3YfTtGCsiD8&feature=youtu.be" onclick="window.open(this.href);return false;
Not sure if youtube links allowed?
http://www.yo*t*be.com/watch?v=3YfTtGCsiD8&feature=youtu.be" onclick="window.open(this.href);return false;
Not sure if youtube links allowed?
KOC 344
Re: Anyone good with a lathe?
For those of you struggling with the link... 
KOCUK 046 Jez
I'm not a complete idiot...................... some parts are missing!!!!!!!!
_____________________________________________________________________
GSX750S3 ANATAK, GSX400SSN, GSX400 MK2 Impulse frame & an almost complete pile of 400 Kat parts to build a hybrid!! GS650G x 1 3/4...........
to be continued
My Gallery
I'm not a complete idiot...................... some parts are missing!!!!!!!!
_____________________________________________________________________
GSX750S3 ANATAK, GSX400SSN, GSX400 MK2 Impulse frame & an almost complete pile of 400 Kat parts to build a hybrid!! GS650G x 1 3/4...........
to be continued
My Gallery
Re: Anyone good with a lathe?
Yep, there's actually a youtube radio button in the full editor
just click it & enter the code [youtube]here[/youtube]
just click it & enter the code [youtube]here[/youtube]
KOCUK 046 Jez
I'm not a complete idiot...................... some parts are missing!!!!!!!!
_____________________________________________________________________
GSX750S3 ANATAK, GSX400SSN, GSX400 MK2 Impulse frame & an almost complete pile of 400 Kat parts to build a hybrid!! GS650G x 1 3/4...........
to be continued
My Gallery
I'm not a complete idiot...................... some parts are missing!!!!!!!!
_____________________________________________________________________
GSX750S3 ANATAK, GSX400SSN, GSX400 MK2 Impulse frame & an almost complete pile of 400 Kat parts to build a hybrid!! GS650G x 1 3/4...........
to be continued
My Gallery
-
Kryten
- Club Member
- Posts: 1795
- Joined: Sun Dec 26, 2010 11:13 pm
- Location: North Norfolk
- Has thanked: 119 times
- Been thanked: 257 times
Re: Anyone good with a lathe?
Now that's impressive
Jim
750 SZ (Not So) Skruffy Kat
1000 SZ in bits
7/11 SZ Long term
T509 Back on the road!
It was a New Day yesterday but, by God, it's an Old Day now!
750 SZ (Not So) Skruffy Kat
1000 SZ in bits
7/11 SZ Long term
T509 Back on the road!
It was a New Day yesterday but, by God, it's an Old Day now!
-
johnr
- Club Member
- Posts: 3022
- Joined: Sun Oct 24, 2010 9:58 pm
- Location: lancashire
- Has thanked: 234 times
- Been thanked: 342 times
Re: Anyone good with a lathe?
nah not really. it didnt actually run under its own power, it was just spun by compressed air. nice enough, but its a bit of a faff to make something that is little more than a glorified windmill, you blow it and it spins!
now THIS is impressive. ok, its knobber clarkson doing the talking, but the car is perfect, and it actually runs under its own power, working gears and everything!
http://www.youtube.com/watch?v=QDZICiGmDxs" onclick="window.open(this.href);return false;
forget compressed air. THAT is what i call impressive engineering!!
now THIS is impressive. ok, its knobber clarkson doing the talking, but the car is perfect, and it actually runs under its own power, working gears and everything!
http://www.youtube.com/watch?v=QDZICiGmDxs" onclick="window.open(this.href);return false;
forget compressed air. THAT is what i call impressive engineering!!
