You will all be pleased to know.....

A place to kick back and talk about anything and everything.
Post Reply
callyboy

You will all be pleased to know.....

Post by callyboy » Thu May 31, 2012 4:29 pm

........that the (cough) Impulse passed its MOT today. This is despite me forgetting to tighten up the rear brake caliper bolts :oops: the leaky fork seals :oops: the faulty front brake light switch :oops: and the advisory on the tyre valve :oops: :oops:

Need to get me tinkering head on again ;)

Pete

User avatar
Katfish
Club Member
Posts: 369
Joined: Wed Nov 10, 2010 4:12 pm
Location: York
Has thanked: 29 times
Been thanked: 29 times

Re: You will all be pleased to know.....

Post by Katfish » Thu May 31, 2012 7:31 pm

No you don't, you need to get out and ride the bloody thing !!!!
Andy...KOC 298
Snap, Crackle & Pop Up

My Gallery

callyboy

Re: You will all be pleased to know.....

Post by callyboy » Thu May 31, 2012 7:51 pm

hush your mouth Andy ;)

Must have clocked up some miles for the forks to start leaking again :lol: :lol: Think the bolts on the brakes was when i swapped the caliper over :oops: :oops: :shock: :shock:

Pete

nokatanayet

Re: You will all be pleased to know.....

Post by nokatanayet » Thu May 31, 2012 8:11 pm

callyboy wrote:........that the (cough) Impulse passed its MOT today. This is despite me forgetting to tighten up the rear brake caliper bolts :oops: the leaky fork seals :oops: the faulty front brake light switch :oops: and the advisory on the tyre valve :oops: :oops:

Need to get me tinkering head on again ;)

Pete
dodgey Mot's.
now get shot of it on evil bay, and we might forgive you ;)

callyboy

Re: You will all be pleased to know.....

Post by callyboy » Thu May 31, 2012 9:08 pm

Nah. Its Rare(just like some of John's turds) ;)

Pete

chris44

Re: You will all be pleased to know.....

Post by chris44 » Mon Jun 04, 2012 5:40 pm

Katfish wrote:No you don't, you need to get out and ride the bloody thing !!!!
Dunno about riding it, it sounds like a bleedin death trap!!

PS back from my hols now Pete to give you some stick :lol: :lol: :lol:

User avatar
sparki
Committee Member
Posts: 1716
Joined: Wed Nov 10, 2010 7:43 am
Location: Derby, England
Has thanked: 80 times
Been thanked: 72 times

Re: You will all be pleased to know.....

Post by sparki » Fri Jun 15, 2012 1:05 pm

what does it take to get an advisory on a tyre valve?
Steve
KOCUK - 241

My Gallery

callyboy

Re: You will all be pleased to know.....

Post by callyboy » Fri Jun 15, 2012 1:23 pm

splitting on the rubber.

Pete

Post Reply