for an SZ
Has anyone on here fitted a swinging arm from a Krash-a-thrashi ZRX1100 to the Kat frame? Or seen it done..
That's the twin shock retro jobbie. It seems to be close enough but the pivot end is about 15mm wider than the standard at 225mm
Replacement swinging arm
-
Kryten
- Club Member
- Posts: 1792
- Joined: Sun Dec 26, 2010 11:13 pm
- Location: North Norfolk
- Has thanked: 118 times
- Been thanked: 254 times
Replacement swinging arm
Jim
750 SZ (Not So) Skruffy Kat
1000 SZ in bits
7/11 SZ Long term
T509 Back on the road!
It was a New Day yesterday but, by God, it's an Old Day now!
750 SZ (Not So) Skruffy Kat
1000 SZ in bits
7/11 SZ Long term
T509 Back on the road!
It was a New Day yesterday but, by God, it's an Old Day now!
-
Pedda
- Club Member
- Posts: 1515
- Joined: Mon Oct 25, 2010 11:21 am
- Location: Stadtlohn, Germany
- Has thanked: 53 times
- Been thanked: 198 times
Re: Replacement swinging arm
Got such a swinger in the basement if you need measurements. For serious approach you have to reposition the lower shock mounts otherwise it'll look a bit x-legged. And yes, narrowing the pivot is a given.
