Speedo/ rev counter

From a simple dustcap to a full on turbo-nitrous breathing monster.
If you have any questions, here's the place to ask.
Post Reply
User avatar
PaulD
Posts: 1082
Joined: Mon Jan 01, 2018 5:48 pm
Location: Usually either the shed or bed
Has thanked: 456 times
Been thanked: 186 times

Speedo/ rev counter

Post by PaulD » Mon Apr 16, 2018 7:01 am

I’ve posted before about my problems with the speedo/rev counter unit fitted to my Kat. I’ve spotted this on fleabay:
https://rover.ebay.com/rover/0/0/0?mpre ... 3067274443
As it’s not too expensive (ie cheap) I thought until I can get the original sorted I might take a chance. Now I’m not brilliant with electrics so do you think it would be reasonably easy to wire this to the bike without making any irreversible changes to the bikes wiring?
Thanks in advance, Paul
There rubbish them Jap bikes lad they won't last five minutes! you want to get yourself a nice Royal Enfield!
A quote from my old dad 8-)

I started out with nothing and I’ve got most of it left!
KOC member 453

User avatar
johnr
Club Member
Posts: 3022
Joined: Sun Oct 24, 2010 9:58 pm
Location: lancashire
Has thanked: 234 times
Been thanked: 342 times

Re: Speedo/ rev counter

Post by johnr » Mon Apr 16, 2018 9:38 pm

brand new katana clocks from japan,ok theyre kph, but theyre 180kph so get a kph to mph adaptor and then theyre 180mph clocks. and cheaper than used originals. theyre mis lableled as gsx1400, so i guess nobodys noticed the mistake yet. but theyve not got many left.

http://www.unicornjapan-shop.com/product/6564

or, you can hack your loom about and fit some aftermarket thing that may or may not work......
My Gallery

KOC 004

pookie
Posts: 505
Joined: Tue May 20, 2014 5:47 pm
Been thanked: 124 times

Re: Speedo/ rev counter

Post by pookie » Tue Apr 17, 2018 4:47 pm

John, those are 400 katana clocks, they have a temperature light and redline at 12,500 rpm, still cheap if yours are fooked, 255us dollars is 180 quid so not bad for a brand new set of clocks

User avatar
fossie
Club Member
Posts: 5182
Joined: Sat Oct 23, 2010 9:16 pm
Has thanked: 179 times
Been thanked: 714 times

Re: Speedo/ rev counter

Post by fossie » Tue Apr 17, 2018 8:31 pm

It's hideous ........tell you what if you want to get yours sorted and just need a set of clocks until then.
I have a set you can borrow. They are 750 ones in kph but you can mark the relevant mph if you need to.
Personally I never bother I know 30 is 50 , 40 is 60 50 is 80 100 is 62.5! . Over that ...
Last edited by fossie on Tue Apr 17, 2018 8:32 pm, edited 1 time in total.
CLUB Chairman


My Gallery

User avatar
Uncle Bob
Site Admin
Posts: 1817
Joined: Mon Nov 26, 2012 12:05 pm
Location: Norwich, Norfolk
Has thanked: 638 times
Been thanked: 243 times
Contact:

Re: Speedo/ rev counter

Post by Uncle Bob » Tue Apr 17, 2018 8:32 pm

You will probably get hit for VAT @ around £36 and the £8 admin fee plus the postage from Japan which can be expensive if they decide to send it fast. I think you are looking at nearer £250 total, but for new clocks, that is still cheap I guess. Rev counter needle is a bit iffy on mine and I'm sort of tempted, but there is other motorbike stuff to spend money on first...

User avatar
johnr
Club Member
Posts: 3022
Joined: Sun Oct 24, 2010 9:58 pm
Location: lancashire
Has thanked: 234 times
Been thanked: 342 times

Re: Speedo/ rev counter

Post by johnr » Tue Apr 17, 2018 8:53 pm

my thoughts are that they arent likely to bee making any more, so if you buy a new set now, youre never going to be out of pocket. i know theyre 400, and th redline is wrong, but with a mph converter making them 180mph theyre still viable unless youre a super originality fetishist.
My Gallery

KOC 004

Post Reply