If you're new to the forum, why not stop off here and say a bit about yourself.
-
KeKat
- Posts: 323
- Joined: Thu Aug 04, 2011 9:23 pm
- Location: Southampton
- Has thanked: 3 times
- Been thanked: 44 times
Post
by KeKat » Tue Aug 16, 2011 10:11 pm
Hi all.
My name is Keith.
I have had my Kat 1000 for about 4 years. bought lots of new bits and pieces.
Then other projects got in the way. so it has lay under cover in the garage all this time, so I thought it was about time to get it running and an MOT.
Took about a week to get it ready for its MOT tomorrow.
PS i have got to set up the slide carbs next, might need a bit of advice.
Thanks
Keith
Keith KOC 355
1982 Suzuki GSX1000SZ
1991 Ducati 900SS
1996 Kawasaki ZZR600
2003 Transalp
2004 MV Agusta brutale F4
2003 Cagiva xtra raptor 1000
2012 Triumph Tiger 800
2019 Suzuki GSX-S 1000S
1966 Triumph T100C (Fixing push rod seals again)
1960 Bianchi Gardena 75 (Restoration Project when i get time)
1961 Triumph T100A (Cafe Racer Project)
-
Pedda
- Club Member
- Posts: 1516
- Joined: Mon Oct 25, 2010 11:21 am
- Location: Stadtlohn, Germany
- Has thanked: 53 times
- Been thanked: 198 times
Post
by Pedda » Tue Aug 16, 2011 10:45 pm
Hi 'n' welcome.
-
Katfish
- Club Member
- Posts: 369
- Joined: Wed Nov 10, 2010 4:12 pm
- Location: York
- Has thanked: 29 times
- Been thanked: 29 times
Post
by Katfish » Wed Aug 17, 2011 4:04 am
Hello & welcome to the forum
-
callyboy
Post
by callyboy » Wed Aug 17, 2011 7:00 am
Dont bother with the slide carbs. Maybe someone on here will buy them from you for a couple of quid
Pete
-
jerry
- Posts: 103
- Joined: Fri Dec 31, 2010 10:45 am
- Location: Sutton Coldfield
- Has thanked: 6 times
- Been thanked: 8 times
Post
by jerry » Wed Aug 17, 2011 11:23 am
That would be me then
and for a couple of quid....I'd have em!!!!!!!
Welcome keith
Jerry
GSX 1000 1982 (Standard except carbs, Harris exhaust, 1100 barrels, pistons and head, GSXR forks, bandit 1200 wheels, hagon shocks, bandit rear brake, ZX9 front brakes cbr9 drop down top yoke and high bars!!)
GSF 1200 K6 2006 Naked
-
KeKat
- Posts: 323
- Joined: Thu Aug 04, 2011 9:23 pm
- Location: Southampton
- Has thanked: 3 times
- Been thanked: 44 times
Post
by KeKat » Wed Aug 17, 2011 1:50 pm
Well it passed it's MOT no problem.
I think i will stick with the carbs for the moment.
Speedo not working, so going to try new cable, as the old one is a bit ruff.
thanks keith
Keith KOC 355
1982 Suzuki GSX1000SZ
1991 Ducati 900SS
1996 Kawasaki ZZR600
2003 Transalp
2004 MV Agusta brutale F4
2003 Cagiva xtra raptor 1000
2012 Triumph Tiger 800
2019 Suzuki GSX-S 1000S
1966 Triumph T100C (Fixing push rod seals again)
1960 Bianchi Gardena 75 (Restoration Project when i get time)
1961 Triumph T100A (Cafe Racer Project)
-
Cat
- Posts: 1473
- Joined: Sun Oct 24, 2010 12:13 pm
- Location: Southern
- Has thanked: 14 times
- Been thanked: 15 times
Post
by Cat » Wed Aug 17, 2011 5:11 pm
Hello, again..lol
-
bobster
Post
by bobster » Thu Aug 18, 2011 10:00 pm
Howdy fellow 1000 owner!
bobster
-
nokatanayet
Post
by nokatanayet » Thu Aug 18, 2011 10:42 pm
hi and welcome. weldone on the mot
-
Katman
- Club Member
- Posts: 1393
- Joined: Wed Nov 10, 2010 10:03 am
- Location: Sussex
Post
by Katman » Fri Aug 19, 2011 12:49 pm
L O & welcome to the madhouse
KOCUK 046 Jez
I'm not a complete idiot...................... some parts are missing!!!!!!!!
_____________________________________________________________________
GSX750S3 ANATAK, GSX400SSN, GSX400
MK2 Impulse frame & an almost complete pile of 400 Kat parts to build a hybrid!! GS650G x 1 3/4...........
to be continued
My Gallery
