front wheel spindle

[sparki]

http://simplybearings.co.uk/shop/" onclick="window.open(this.href);return false;

[sparki]

simply search by size and choose the quality you want - crap = cheap, decent = not as cheap

[callyboy]

Cheers Steve. Looks handy.

Pete

[chris44]

Pete Deeds is your man in the club otherwise get your measuring stick out theres a guy in bolton i can go and see for you

[Katman]

Deeds is your man in the club

Ooh eer is that even possible???

[callyboy]

OK. Think I have found a place for the bearings(cheers Steve). Now how do you get the old ones out ? Looking inside their isnt a lip or anything to get a screwdriver on and whack em. Do i need a puller ? Most youtube clips are saying push the centre space out of the way to get onto the bearing, but i cant push the space anywhere out of the way.

Thanks

Pete

[bobster]

Get a big screwdriver and lever the spacer over to one side, then you'll need a piece of bar or tubing to knock the bearings out!

simples!

I wonder if this thread is going to be as long as all the other ones...............

[callyboy]

Stop being so cheeky. Gives you lot something to laugh about dont it.


oh....and thanks for the advice.

Thanks

Pete

[AndySwad]

Get a blowlamp and heat the surrounding area, the bearing will come out much easier once the area its in has expanded, wheels are easy, swingarms a different matter they are a bitch

[FBJ]

Sometimes you have to tap the spacer. Then use a drift. I use a old knackered 3/8" drive extension bar. Share the tapping of the bearing. Make it equal or u could damage the wheel. Don't be to RAM headed