650 Seat...

[G0FHM]

Chaps,

Does the 650 seat have anything bolted around the latch slots?

I only ask, as ours won't latch down as the slots are too long. I note that there are 2x 6mm threads coming through next to each slot.

Plates or something to make the holes a bit smaller?

Cheers,

J

[fossie]

Struggling to work out what you mean, could take a photo.

Basically the seat plate has 4x 10mm nuts that hold it on . there are slots because it can be adjusted .
The threaded bolts are in the seat base captive.

[G0FHM]

Fossie,


From what you have just described we are missing the seat plate!

Just have 4x 6mm captive bolts in the baseplate, no plate.

Thanks, I was suspecting something similar!

J

[fossie]

Also check out my answer in project section.