Rotor Removing tool

From a simple dustcap to a full on turbo-nitrous breathing monster.
If you have any questions, here's the place to ask.
Post Reply
User avatar
JACKJABBA
Posts: 67
Joined: Sat Jan 15, 2011 6:46 pm
Location: Middleton St George

Rotor Removing tool

Post by JACKJABBA » Sat Mar 05, 2011 4:02 pm

Hi Guys,
does anyone know what size rotor removal tool I need to get the rotor off on my 1100 engine :?: Does the club have one :?:

Regards Jack
GSX1100SZ
RD500LC
RD250LC
VF1000R
XZ550 (needs the new exhausts fitting)
VF500F2 (needs the owner to stop going on ebay)
KE 125 1976

KOCUK 316
Top
User avatar
JACKJABBA
Posts: 67
Joined: Sat Jan 15, 2011 6:46 pm
Location: Middleton St George

Re: Rotor Removing tool

Post by JACKJABBA » Sat Mar 05, 2011 6:17 pm

Looks like m30 x 1.5 RH
GSX1100SZ
RD500LC
RD250LC
VF1000R
XZ550 (needs the new exhausts fitting)
VF500F2 (needs the owner to stop going on ebay)
KE 125 1976

KOCUK 316
Top
bobster

Re: Rotor Removing tool

Post by bobster » Sat Mar 05, 2011 6:23 pm

we are working on it............just sent one i borrowed to Fossie.

you're not a Club member though! ;)
Top
User avatar
JACKJABBA
Posts: 67
Joined: Sat Jan 15, 2011 6:46 pm
Location: Middleton St George

Re: Rotor Removing tool

Post by JACKJABBA » Sat Mar 05, 2011 6:28 pm

Yes I am. :D Just forgot my KOC number :roll:

Does this look ok, as I don't mind buying one.


http://www.priceninja.com/Editorial/fly ... 8736-p.asp
GSX1100SZ
RD500LC
RD250LC
VF1000R
XZ550 (needs the new exhausts fitting)
VF500F2 (needs the owner to stop going on ebay)
KE 125 1976

KOCUK 316
Top
User avatar
Pedda
Club Member
Posts: 1516
Joined: Mon Oct 25, 2010 11:21 am
Location: Stadtlohn, Germany
Has thanked: 53 times
Been thanked: 198 times

Re: Rotor Removing tool

Post by Pedda » Sun Mar 06, 2011 9:17 am

total view (Klein).jpg
total view bolt (Klein).jpg
thread M30 x 1,5mm (Klein).jpg
thread length 22mm (Klein).jpg
od 50mm (Klein).jpg
Top
User avatar
Pedda
Club Member
Posts: 1516
Joined: Mon Oct 25, 2010 11:21 am
Location: Stadtlohn, Germany
Has thanked: 53 times
Been thanked: 198 times

Re: Rotor Removing tool

Post by Pedda » Sun Mar 06, 2011 9:21 am

exeption 36mm (Klein).jpg
length 65mm (Klein).jpg
bolt length (Klein).jpg
bolt thread length (Klein).jpg
bolt head 24mm (Klein).jpg
Top
User avatar
JACKJABBA
Posts: 67
Joined: Sat Jan 15, 2011 6:46 pm
Location: Middleton St George

Re: Rotor Removing tool

Post by JACKJABBA » Sun Mar 06, 2011 9:34 am

Thanks Pedda. I will buy one and donate it to the club when I have rebuilt my engine.

Cheers Jack
GSX1100SZ
RD500LC
RD250LC
VF1000R
XZ550 (needs the new exhausts fitting)
VF500F2 (needs the owner to stop going on ebay)
KE 125 1976

KOCUK 316
Top
User avatar
sparki
Committee Member
Posts: 1715
Joined: Wed Nov 10, 2010 7:43 am
Location: Derby, England
Has thanked: 80 times
Been thanked: 72 times

Re: Rotor Removing tool

Post by sparki » Sun Mar 06, 2011 10:04 am

That link ya posted seems a good price for one ... Pop your membership number iqn your sig ... Easier to recognise who's who ;)
Steve
KOCUK - 241

My Gallery
Top
User avatar
fossie
Club Member
Posts: 5182
Joined: Sat Oct 23, 2010 9:16 pm
Has thanked: 179 times
Been thanked: 714 times

Re: Rotor Removing tool

Post by fossie » Sun Mar 06, 2011 11:47 pm

we have a 1100 tool that belongs to a member , the 1 needed is a pop up , However bobster aquired 1 from the trade , BUT doesn't do it. The thread isn't long enough and they correct tool should have a taper it looks like.

So drawing board stge for that one then .

Bobster will get it back asap. Cheers anyway and thank the trade lads for their help.
CLUB Chairman


My Gallery
Top
bobster

Re: Rotor Removing tool

Post by bobster » Mon Mar 07, 2011 12:33 pm

Cheers
Can you make sure you put a return address ( sender) in case it gets lost and then has to go to the "Raiders of the lost Arc hanger" Never to be seen again just like my chain oiler!
Top
Post Reply

Return to “Technical Q&A”