750 kat fork seals

[kiwi k]

Very easy no need to strip forks either, just remove said fork/s and remove dust cover/s, then pop out spring retainer and drive 2/3 small long self tapping screws into seal and gently pull it up with pliers or grips out of fork tube, if in doubt tape card around tanchions to protect.

[kiwi k]

plenty on ebay, just make sure you get right year and model

What i also should of said is are the stanchions free from rust pits and scratches on the area of seal travel , because if not then new seals won't last long

[kiwi k]

As long as its a 1982 Suzuki GXS750S Katana with standard forks should be these

http://www.ebay.co.uk/itm/Pyramid-Parts ... 374wt_1051" onclick="window.open(this.href);return false;

or seals and dust caps

http://www.ebay.co.uk/itm/Pyramid-Parts ... 459wt_1051" onclick="window.open(this.href);return false;


but to double check measure to see if stanchions are 35mm

[sparki]

i thought the 750 1000 and 1100 were all the same.... my forks, 750, are 37mm

[kiwi k]

Steve they are but i think he got confused over the 750 options

[bobster]

Fit genuine Suzuki seals or you'll be fitting another set in no time at all!