650 final drive

From a simple dustcap to a full on turbo-nitrous breathing monster.
If you have any questions, here's the place to ask.
Post Reply
User avatar
sparki
Committee Member
Posts: 1716
Joined: Wed Nov 10, 2010 7:43 am
Location: Derby, England
Has thanked: 80 times
Been thanked: 72 times

650 final drive

Post by sparki » Sat Jul 20, 2013 10:04 am

no idea if it's ever been opened, if it's greased up etc... do i need to know anything before i open up the final drive on the back wheel and clean-up / re-grease all the bits? do i NEED to open it up if it turns smoothly?

first shaft drive bike and not sure what's needed... thought i'd ask rather than my std gung-ho attitude and screw it up before asking :)

cheers
Steve
KOCUK - 241

My Gallery
Top
User avatar
Katgeezer
Posts: 909
Joined: Thu Dec 23, 2010 4:02 pm
Location: Orpington,Kent
Has thanked: 6 times
Been thanked: 8 times

Re: 650 final drive

Post by Katgeezer » Sat Jul 20, 2013 10:49 am

Just grease the splines on the drive on the back wheel mate. Not really anything else to do unless there's a problem with a bearing. They do tend to just go and go and go...
TOO MUCH IS NEVER ENOUGH

THE VULTURE WILL STRIKE

Chris KOC154

Lost count........
Top
User avatar
sparki
Committee Member
Posts: 1716
Joined: Wed Nov 10, 2010 7:43 am
Location: Derby, England
Has thanked: 80 times
Been thanked: 72 times

Re: 650 final drive

Post by sparki » Sat Jul 20, 2013 1:06 pm

gotcha... leave alone and simply clean/grease in the case :) - cheers bud!
Steve
KOCUK - 241

My Gallery
Top
Post Reply

Return to “Technical Q&A”