From a simple dustcap to a full on turbo-nitrous breathing monster.
If you have any questions, here's the place to ask.
-
johnr
- Club Member
- Posts: 3022
- Joined: Sun Oct 24, 2010 9:58 pm
- Location: lancashire
- Has thanked: 234 times
- Been thanked: 342 times
Post
by johnr » Tue Mar 25, 2014 10:28 pm
kph or mph speedo? if kph then 180 kph or 240kph?
-
johnr
- Club Member
- Posts: 3022
- Joined: Sun Oct 24, 2010 9:58 pm
- Location: lancashire
- Has thanked: 234 times
- Been thanked: 342 times
Post
by johnr » Fri Mar 28, 2014 10:30 pm
dont try other suzukis from a later date. try other manufacturers bikes from the same era. i know that 1100 goldwings had identical needles to the kay, only they were white, this means they must have been made by the same firm.
-
johnr
- Club Member
- Posts: 3022
- Joined: Sun Oct 24, 2010 9:58 pm
- Location: lancashire
- Has thanked: 234 times
- Been thanked: 342 times
Post
by johnr » Sat Mar 29, 2014 8:51 pm
are you a club member?
-
sparki
- Committee Member
- Posts: 1716
- Joined: Wed Nov 10, 2010 7:43 am
- Location: Derby, England
- Has thanked: 80 times
- Been thanked: 72 times
Post
by sparki » Sat Mar 29, 2014 10:23 pm
profile says.... not yet
-
Cat
- Posts: 1473
- Joined: Sun Oct 24, 2010 12:13 pm
- Location: Southern
- Has thanked: 14 times
- Been thanked: 15 times
Post
by Cat » Tue Apr 01, 2014 8:06 pm
She is one now John
-
johnr
- Club Member
- Posts: 3022
- Joined: Sun Oct 24, 2010 9:58 pm
- Location: lancashire
- Has thanked: 234 times
- Been thanked: 342 times
Post
by johnr » Wed Apr 09, 2014 4:15 pm
im in the shed tonight working on that pop up motor. i will look in my box of bits.
-
johnr
- Club Member
- Posts: 3022
- Joined: Sun Oct 24, 2010 9:58 pm
- Location: lancashire
- Has thanked: 234 times
- Been thanked: 342 times
Post
by johnr » Wed Apr 09, 2014 8:07 pm
you dont need a working speedo for an mot test.
-
johnr
- Club Member
- Posts: 3022
- Joined: Sun Oct 24, 2010 9:58 pm
- Location: lancashire
- Has thanked: 234 times
- Been thanked: 342 times
Post
by johnr » Thu Apr 10, 2014 10:29 pm
sort of. ive a kph speedo drive, but im not sure if its got the pin in the centre for the needle to fit to. im gonna compare it to another speedo but that means taking one to bits!
-
kiwi k
- Club Member
- Posts: 168
- Joined: Tue Apr 23, 2013 8:18 pm
- Location: Attleborough
Post
by kiwi k » Thu Apr 17, 2014 5:39 pm
John on my kmh set i have just dismantled the 2 needle shafts are different sizes is that normal? cheers Kiwi.