Hi All,
Im in need of a set of floats for my katana 1000 .
Does anyone have an idea where I could get a set?
tried Robinsons and B&B no luck not on the Suzuki parts list anymore
any help greatly appreciated
thanks , Jak
katana 1000 carbs
-
bobster
Re: katana 1000 carbs
Hi and welcome!
Most VM carbs have the same floats in them...........Why do you need a full set? Are they leaking? if so they can be repaired / soldered up!
GS550/750 slide carbs are still plentifull
Most VM carbs have the same floats in them...........Why do you need a full set? Are they leaking? if so they can be repaired / soldered up!
GS550/750 slide carbs are still plentifull
-
KeKat
- Posts: 323
- Joined: Thu Aug 04, 2011 9:23 pm
- Location: Southampton
- Has thanked: 3 times
- Been thanked: 44 times
Re: katana 1000 carbs
Hi Katmarch (steve) sorted out my carbs.
I think he started out with the fuel screws at 1 turn out and the air screws at 1 1/4 out. Then adjusted using his gas analyzer.
the jets are standard.
Keith
I think he started out with the fuel screws at 1 turn out and the air screws at 1 1/4 out. Then adjusted using his gas analyzer.
the jets are standard.
Keith
Keith KOC 355
1982 Suzuki GSX1000SZ
1991 Ducati 900SS
1996 Kawasaki ZZR600
2003 Transalp
2004 MV Agusta brutale F4
2003 Cagiva xtra raptor 1000
2012 Triumph Tiger 800
2019 Suzuki GSX-S 1000S
1966 Triumph T100C (Fixing push rod seals again)
1960 Bianchi Gardena 75 (Restoration Project when i get time)
1961 Triumph T100A (Cafe Racer Project)
1982 Suzuki GSX1000SZ
1991 Ducati 900SS
1996 Kawasaki ZZR600
2003 Transalp
2004 MV Agusta brutale F4
2003 Cagiva xtra raptor 1000
2012 Triumph Tiger 800
2019 Suzuki GSX-S 1000S
1966 Triumph T100C (Fixing push rod seals again)
1960 Bianchi Gardena 75 (Restoration Project when i get time)
1961 Triumph T100A (Cafe Racer Project)
-
katanatom
- Posts: 81
- Joined: Thu Dec 30, 2010 8:39 pm
- Location: Generally UK
- Has thanked: 14 times
- Been thanked: 5 times
Re: katana 1000 carbs
Sorry to dig this one up again, I was hiding in 2014, and only now catching up!
Bobster says the floats can be repaired. How? Who?
Found out my floats were porous when the set was ultrasonically cleaned. They sank!
cheers
Bobster says the floats can be repaired. How? Who?
Found out my floats were porous when the set was ultrasonically cleaned. They sank!
cheers
Alex AKA KatanaTom
ex - KOC 259
_________________
no bikes! [sobs uncontrolably]
Katanatom.co.uk website is no more
ex - KOC 259
_________________
no bikes! [sobs uncontrolably]
Katanatom.co.uk website is no more
