From a simple dustcap to a full on turbo-nitrous breathing monster.
If you have any questions, here's the place to ask.
-
wraith
- Posts: 195
- Joined: Fri Jan 07, 2011 4:42 pm
- Has thanked: 13 times
- Been thanked: 9 times
Post
by wraith » Mon Dec 07, 2015 7:04 pm
Hi all,
Just need to conform the wires to the clocks tacho on the gray import gsx750s1 Kat.
I think it's the black with yellow tracer?
I know most suzukis now have a black with red tracer but my Kat dose not have a black with red just black with yellow.
Any help
-
Kryten
- Club Member
- Posts: 1793
- Joined: Sun Dec 26, 2010 11:13 pm
- Location: North Norfolk
- Has thanked: 118 times
- Been thanked: 257 times
Post
by Kryten » Tue Dec 08, 2015 9:20 am
Hi.
Not able to look at my Kat as I'm at work. But from the drawings I have and the memories of the rebuild the wiring should be as follows.
On Bike Harness has a Black with Yellow trace from the CDI to Coil, this joins to a Brown at the Harness to Instrument sub-loom.
12V supply to Tacho is Orange with Green trace(Harness) to Yellow with Red trace on the sub-loom
Ground is Black with White Trace (Harness) to White on the Sub Loom
Hope this helps
Jim
750 SZ (Not So) Skruffy Kat
1000 SZ in bits
7/11 SZ Long term
T509 Back on the road!
It was a New Day yesterday but, by God, it's an Old Day now!
-
Pedda
- Club Member
- Posts: 1516
- Joined: Mon Oct 25, 2010 11:21 am
- Location: Stadtlohn, Germany
- Has thanked: 53 times
- Been thanked: 198 times
Post
by Pedda » Fri Dec 11, 2015 3:33 pm
Kryten wrote:Hi.
Not able to look at my Kat as I'm at work. But from the drawings I have and the memories of the rebuild the wiring should be as follows.
On Bike Harness has a Black with Yellow trace from the CDI to Coil, this joins to a Brown at the Harness to Instrument sub-loom.
12V supply to Tacho is Orange with Green trace(Harness) to Yellow with Red trace on the sub-loom
Ground is Black with White Trace (Harness) to White on the Sub Loom
Hope this helps
Just by memory!
Holy f**k, how comes you came over that late with your birthday greets?
-
Kryten
- Club Member
- Posts: 1793
- Joined: Sun Dec 26, 2010 11:13 pm
- Location: North Norfolk
- Has thanked: 118 times
- Been thanked: 257 times
Post
by Kryten » Fri Dec 11, 2015 6:02 pm
Pedda wrote:Kryten wrote:Hi.
Not able to look at my Kat as I'm at work. But from the drawings I have and the memories of the rebuild the wiring should be as follows.
On Bike Harness has a Black with Yellow trace from the CDI to Coil, this joins to a Brown at the Harness to Instrument sub-loom.
12V supply to Tacho is Orange with Green trace(Harness) to Yellow with Red trace on the sub-loom
Ground is Black with White Trace (Harness) to White on the Sub Loom
Hope this helps
Just by memory!
Holy f**k, how comes you came over that late with your birthday greets?
Selective memory loss coincides with Selective Deafness according to Mrs Kryten
Jim
750 SZ (Not So) Skruffy Kat
1000 SZ in bits
7/11 SZ Long term
T509 Back on the road!
It was a New Day yesterday but, by God, it's an Old Day now!
-
Pedda
- Club Member
- Posts: 1516
- Joined: Mon Oct 25, 2010 11:21 am
- Location: Stadtlohn, Germany
- Has thanked: 53 times
- Been thanked: 198 times
Post
by Pedda » Fri Dec 11, 2015 6:27 pm
Haha. Similar things goin' on here - I only have to ask Mrs. Pedda to learn what's wrong with me...
-
wraith
- Posts: 195
- Joined: Fri Jan 07, 2011 4:42 pm
- Has thanked: 13 times
- Been thanked: 9 times
Post
by wraith » Sat Dec 12, 2015 4:55 pm
All sorted and working, thanks all.
