Rear Brake line mounting rubbers GSX400SSN

From a simple dustcap to a full on turbo-nitrous breathing monster.
If you have any questions, here's the place to ask.
Post Reply
User avatar
Uncle Bob
Site Admin
Posts: 1818
Joined: Mon Nov 26, 2012 12:05 pm
Location: Norwich, Norfolk
Has thanked: 638 times
Been thanked: 243 times
Contact:

Rear Brake line mounting rubbers GSX400SSN

Post by Uncle Bob » Fri Jun 08, 2018 11:10 am

I have changed the rear brake line to a braided one, but am missing 1 of the rubbers that help it clip to the swingarm.
These aren't a Suzuki part number as they come with the brake line itself.
Anyone have one or know other bikes that might have them as I could possibly look for a secondhand line on Ebay with one attached to. They are flat one side that goes against the swingarm.

Marked in Yellow on the parts image below.
gsx400 rear brake line.PNG

User avatar
sparki
Committee Member
Posts: 1716
Joined: Wed Nov 10, 2010 7:43 am
Location: Derby, England
Has thanked: 80 times
Been thanked: 72 times

Re: Rear Brake line mounting rubbers GSX400SSN

Post by sparki » Mon Jun 11, 2018 8:44 pm

call venhill or hel as they use the same on their braided lines... maybe they'd sell/send you one?
Steve
KOCUK - 241

My Gallery

User avatar
Uncle Bob
Site Admin
Posts: 1818
Joined: Mon Nov 26, 2012 12:05 pm
Location: Norwich, Norfolk
Has thanked: 638 times
Been thanked: 243 times
Contact:

Re: Rear Brake line mounting rubbers GSX400SSN

Post by Uncle Bob » Tue Jun 12, 2018 10:22 am

Blix wrote:Got this if it’s any use, obviously it’s been cut but that could be glued & hidden.
Thanks for looking Blix.
That looks quite a bit different but could be cut around I guess. If I can't get the same though, I'll probably use some old inner tube I have, cut and wrapped around it.

Cheers

Rob

User avatar
Uncle Bob
Site Admin
Posts: 1818
Joined: Mon Nov 26, 2012 12:05 pm
Location: Norwich, Norfolk
Has thanked: 638 times
Been thanked: 243 times
Contact:

Re: Rear Brake line mounting rubbers GSX400SSN

Post by Uncle Bob » Tue Jun 12, 2018 10:25 am

sparki wrote:call venhill or hel as they use the same on their braided lines... maybe they'd sell/send you one?
It was a Hel line I replaced it with, but it only had one (I think it was 1 or none) on it. I'll go for some old inner-tube wrapped around it probably.

Cheers

UB

User avatar
Uncle Bob
Site Admin
Posts: 1818
Joined: Mon Nov 26, 2012 12:05 pm
Location: Norwich, Norfolk
Has thanked: 638 times
Been thanked: 243 times
Contact:

Re: Rear Brake line mounting rubbers GSX400SSN

Post by Uncle Bob » Tue Jun 19, 2018 8:18 am

Having a tidy up in the garage and found some rubber pipe with thick 3mm walls, that fitted the job perfectly, once cut to size.

Post Reply