Help please!!
Where is the best place to buy a full set of carb inlet rubbers for my 1981 550M? Apart from eBay..... Any help appreciated
Sourcing carb inlet rubbers
-
PaulD
- Posts: 1082
- Joined: Mon Jan 01, 2018 5:48 pm
- Location: Usually either the shed or bed
- Has thanked: 456 times
- Been thanked: 186 times
Re: Sourcing carb inlet rubbers
Robinsons foundry stock a fairly comprehensive selection of classic Suzuki parts or you could try Slingers Suzuki in Preston. Suzuki classic spares on eBay are pretty good too
There rubbish them Jap bikes lad they won't last five minutes! you want to get yourself a nice Royal Enfield!
A quote from my old dad
I started out with nothing and I’ve got most of it left!
KOC member 453
A quote from my old dad
I started out with nothing and I’ve got most of it left!
KOC member 453
-
Uncle Bob
- Site Admin
- Posts: 1789
- Joined: Mon Nov 26, 2012 12:05 pm
- Location: Norwich, Norfolk
- Has thanked: 621 times
- Been thanked: 232 times
- Contact:
Re: Sourcing carb inlet rubbers
I'll see if I can find the part numbers for them. Once you have those it's easier to Google and find them. Can't do at the moment though as out! Check back in a day or 2.
Thanks
UB
Thanks
UB
-
Kryten
- Club Member
- Posts: 1755
- Joined: Sun Dec 26, 2010 11:13 pm
- Location: North Norfolk
- Has thanked: 115 times
- Been thanked: 246 times
Re: Sourcing carb inlet rubbers
Hi.
From Robinsons Foundary website:
19 RH INTAKE PIPE (13110-47010)
20 LH INTAKE PIPE (13120-47010)
Both listed as £54.87 each. Need to replace the O ring at the same time they are:
23 O RING (09280-38004)
Old Part Number 09280-38003 £2.66
The screen shot and part numbers are for the '81 GS550 EX
I used to have a 550MX in the dim and distant past
Don't forget to post up in "Say Hello" and post some pictures. We like pictures
From Robinsons Foundary website:
19 RH INTAKE PIPE (13110-47010)
20 LH INTAKE PIPE (13120-47010)
Both listed as £54.87 each. Need to replace the O ring at the same time they are:
23 O RING (09280-38004)
Old Part Number 09280-38003 £2.66
I used to have a 550MX in the dim and distant past
Don't forget to post up in "Say Hello" and post some pictures. We like pictures
Jim
750 SZ (Not So) Skruffy Kat
1000 SZ in bits
7/11 SZ Long term
T509 Back on the road!
It was a New Day yesterday but, by God, it's an Old Day now!
750 SZ (Not So) Skruffy Kat
1000 SZ in bits
7/11 SZ Long term
T509 Back on the road!
It was a New Day yesterday but, by God, it's an Old Day now!
-
Uncle Bob
- Site Admin
- Posts: 1789
- Joined: Mon Nov 26, 2012 12:05 pm
- Location: Norwich, Norfolk
- Has thanked: 621 times
- Been thanked: 232 times
- Contact:
Re: Sourcing carb inlet rubbers
Thanks for getting the part numbers Kryten, saved me a job! They are the same as the GS650 btw.
Using those then they are shown at AJ Sutton (Fossie got some 650 ones there) for £30 but it isn't clear if they have them or just list the parts, you might have to call - https://www.ajsutton.co.uk/genuineparts ... head?uID=0
Else I would probably use CMSNL in Holland as they show as €32 there https://www.cmsnl.com/products/pipe-int ... Ufqj-hKiUm and https://www.cmsnl.com/products/pipeinta ... UfqvOhKiUk
If they are NOS then Ebay is OK to use.
UB
Using those then they are shown at AJ Sutton (Fossie got some 650 ones there) for £30 but it isn't clear if they have them or just list the parts, you might have to call - https://www.ajsutton.co.uk/genuineparts ... head?uID=0
Else I would probably use CMSNL in Holland as they show as €32 there https://www.cmsnl.com/products/pipe-int ... Ufqj-hKiUm and https://www.cmsnl.com/products/pipeinta ... UfqvOhKiUk
If they are NOS then Ebay is OK to use.
UB
