Hi from Surrey

If you're new to the forum, why not stop off here and say a bit about yourself.
peteburnett
Posts: 6
Joined: Thu Aug 15, 2019 9:37 pm

Hi from Surrey

Post by peteburnett » Sun Jan 19, 2020 3:17 pm

Hi All

have joined as i want to start to build a 1100 kat from a pile of parts that i have - all pretty much standard but all pretty rough

all i am missing is a frame and logbook - any suggestions where i can get one from?

again i have the usual 'standard v modified' dilemma - i have built the last couple of bikes as very non standard (a 56 matchless G9 500 twin and currently a 78 750 bonnie) but thinking this needs to be standard .......

i had a 750 Kat with the pop up headlight in 1991 / 1993 when i lived in new zealand and loved it.

User avatar
Uncle Bob
Site Admin
Posts: 1817
Joined: Mon Nov 26, 2012 12:05 pm
Location: Norwich, Norfolk
Has thanked: 638 times
Been thanked: 243 times
Contact:

Re: Hi from Surrey

Post by Uncle Bob » Sun Jan 19, 2020 8:04 pm

Hi and welcome. As well as asking here you could try asking on the Aircooled Suzuki (ACS) Facebook page as well. Haven't seen a frame for sale in a while though, but until you ask, you never know.

If you get a frame sorted, start a thread in the Project section so we can see your progress!

UB

peteburnett
Posts: 6
Joined: Thu Aug 15, 2019 9:37 pm

Re: Hi from Surrey

Post by peteburnett » Sun Jan 19, 2020 8:29 pm

Hi

would be happy to share progress - don't have facebook though - am a crusty old bugger

User avatar
fossie
Club Member
Posts: 5182
Joined: Sat Oct 23, 2010 9:16 pm
Has thanked: 179 times
Been thanked: 714 times

Re: Hi from Surrey

Post by fossie » Sun Jan 19, 2020 9:02 pm

Hi there welcome along , 1100 frames and hens teeth are interchangeable nowadays .
A 750 Kat frame may be obtainable and are the same except the front engine mounts , but templates are again easily obtainable.

Maybe a GSX1100 ET Frame could be acceptable but would need a bit of lug welding , depends on your tools, expertise, or associates. ;)
CLUB Chairman


My Gallery

peteburnett
Posts: 6
Joined: Thu Aug 15, 2019 9:37 pm

Re: Hi from Surrey

Post by peteburnett » Sun Jan 19, 2020 9:07 pm

ok that/s good to know thanks will keep a look out for one of those as well

will keep you informed

cheers

User avatar
Uncle Bob
Site Admin
Posts: 1817
Joined: Mon Nov 26, 2012 12:05 pm
Location: Norwich, Norfolk
Has thanked: 638 times
Been thanked: 243 times
Contact:

Re: Hi from Surrey

Post by Uncle Bob » Sun Jan 19, 2020 10:09 pm

Do you want me to put a ask out on the ACS FB group? They do have a forum as well but they tend to be a FB bunch.
I do prefer our forum. The Project page is on this forum at viewforum.php?f=9
Actually SpondonChris has his 750/1100 thread top of the page (earlier images are missing from when the forum moved hosts unfortunately). Chris was the guy who lent the Team Classic Suzuki a 750 frame for them to copy for their Katana racer.

pookie
Posts: 505
Joined: Tue May 20, 2014 5:47 pm
Been thanked: 124 times

Re: Hi from Surrey

Post by pookie » Mon Jan 20, 2020 5:01 pm

Welcome, and good luck with the build, hopefully when it's finished it can keep my 250 Kat company at Newlands Corner or Boxhill

peteburnett
Posts: 6
Joined: Thu Aug 15, 2019 9:37 pm

Re: Hi from Surrey

Post by peteburnett » Thu Jan 23, 2020 8:04 pm

Hi

Yes if you could put a message on FB for me that would be great

appreciated

User avatar
Pedda
Club Member
Posts: 1516
Joined: Mon Oct 25, 2010 11:21 am
Location: Stadtlohn, Germany
Has thanked: 53 times
Been thanked: 198 times

Re: Hi from Surrey

Post by Pedda » Fri Jan 24, 2020 2:55 pm

Welcome here. Be prepared to stay in contact with the continentals despite brexit once you're in here.

User avatar
Uncle Bob
Site Admin
Posts: 1817
Joined: Mon Nov 26, 2012 12:05 pm
Location: Norwich, Norfolk
Has thanked: 638 times
Been thanked: 243 times
Contact:

Re: Hi from Surrey

Post by Uncle Bob » Sat Jan 25, 2020 10:05 pm

peteburnett wrote:
Thu Jan 23, 2020 8:04 pm
Hi
Yes if you could put a message on FB for me that would be great
appreciated
I have posted in the ACS FB group, but no replies... sorry. Will have to just wait and keep looking.

Post Reply